|Solidbumper for iPhone8/7|
We often hear comments from our customers that "Gild Design's cases all have the same basic design with four protruding corners―their designs never really change."
Most of the time when a smartphone falls, it tilts and land on one of its four corners.
Ordinary aluminum cases have corners with a thickness uniform with that of the rest of the case. These carry a risk of deformation when dropped.
Our company ‘s cases are stress tested with 3DCAD, and we have conducted several drop tests. We think that actual drop test are of the utmost importance.
Our cases are designed to withstand being dropped several times without deforming.
Designing a case that protects and easy to use led us to using the aforementioned designs.
Gild Design's cases may not be fancy to look at. Attaching or removing them with the bolt may also take a bit of time.
However, we think providing users with stress-free operation and a build quality that resists damage due to falls and bending should be of primary importance in our designs.
We want to provide cases that will protect your phone for 2 years at the least ― Even if the case has been roughly used.
|Regarding the Qi wireless charge|
It is possible to charge with a Qi wireless charger while using a Solid bumper case (*1)
It will not charge when using a Solid case or an aluminum back panel.
( Please charge with the genuine lighting cable attached with the iPhone)
|Regarding the WIFI、3G、4G、Bluetooth、GPS、NFC, etc.
(When an aluminum panel is attached the conditions are the same as the Solid case. )
|Wifi||→||There are no problem using wifi for both Solid bumper and Solid case. *2|
|3G||→||There are no problem using 3G while the Solid bumper is attached.
Regarding the Solid case, there is some interference with the signal.
However, there is no problem when receiving 4G. *2
|4G||→||There are no problem using 4G for both Solid bumper and Solid case. *2|
|Bluetooth||→||There are no problem using Bluetooth for both Solid bumper and Solid case. *2|
|GPS||→||There are no problem using GPS for both Solid bumper and Solid case. *2|
*1 Using the Qi wireless charger while the case is attached has the possibilities to lower
the charge efficiency due to the 1.5mm thickness of the case that makes a gap between
the wireless charger and the iPhone. Also, there will be a difference on
the charging time depending on the output wattage and the voltage of the adapter the Qi wireless charger.
*2 This product is made of Duralumin, which interrupts the signal from the back of the iPhone.
It is possible that might lower the phone reception.
Using the case in places with a poor reception in the first place can lower the reception of the signal even more. However, there are no problems in places with a good reception.
|The product below can be used with the Solid bumper.|
|Ichimatsu Aluminum panel for Solid Bumper for iPhone8/7||Tempered glass protective film for iPhone 6/6s/7/8|
|Aluminum color screw set|
|About polished black|
Standard color black cases are made by simply anodizing
the milled aluminum cases after washing the case.
However, polished black cases are made in a different way.
The milled cases are buffed, washed, and anodized.
Then buffed again before shipping.
This model suits the Jet Black iPhone 7 very well.
*The surface finishing is not the same as the Jet black for iPhone 7.
|The difference between SILVER and POLISH|
Polish is made by buffing the aluminum until it has a mirror bright finish.
It can easily have scratches and finger prints on,so it requires more care
but it is beautifully and smoothly finished.
Silver is made by anodizing the aluminum ,making is
stronger from scratches,finger prints and
any other stain won’t get easily on it.
|Regarding the order.|
Please read carefully the following before making an order.
We will send a notification regarding the date of delivery individually by email.
The shipment will be in the order as we received them. However, Order colors, and mixed color cases will take time to prepare, this might change the shipping order.
Before making an order please be sure to set your mail to receive messages from email@example.com.
When the order is complete an auto reply message will be send to you. If you cannot receive the message, please contact firstname.lastname@example.org after setting the domain.
・Please understand that we are not responsible for any breakage, or damage that may be caused by actions that were not suggested in this instruction.
・This product is made of Duralumin, which interrupts the signal from the back of the iPhone. It is possible that might lower the phone reception.
・This product is anodized. There are two dots that were not anodized on the inside of the case. These are the electrical connection places that will not catch the color during the anodizing process, and it is not a defect.
・This product is designed for iPhone8/7.
・This product is not made to protect the iPhone8/7 completely from all kinds of damage. Please notice that we will not be responsible for any breakage, loss, damage, or data loss of the iPhone.
・By using silicone shock absorber sheets, our product is designed to prevent the iPhone and the aluminum case from touching each other, and it is not designed to protect the iPhone from all damage.
・Please be aware that our company will not be responsible for any scratches on your iPhone when using the case.
・We might make changes on the case functions, appearance, or package contents without giving a notice.
・There are possibilities that chargers and earphones that are made by companies other than apple cannot be used. (The diameter of the earphone jack is 8.5mm)
・Any protection film under 0.2mm can be used. However, depending on the type of the film there will be possibilities that the film make a gap between it and the screen.
・This case is made of aluminum! Please be careful on the sharp edges when installing the case.
・There is a top and bottom in this product. Please be sure that the circular cut on the case will go to the earphone jack side.
・After putting the wrench firmly into the screw, please fasten it with the right amount of force to prevent the screw from breaking.
・Please note that as the characteristics of anodizing, it is difficult to produce the same color.
There are possibilities that color differs from the image due to the production lot
※iPhone.iPad are trademarks of Apple Inc.
※The trademark'iPhone'is used with a license from Aiphone K.K.