Home/Products/Solid bumper for iPhone 11
We often hear comments from our customers that "Gild Design's cases all have the same basic design with four protruding corners―their designs never really change."
Most of the time when a smartphone falls, it tilts and land on one of its four corners.
Ordinary aluminum cases have corners with a thickness uniform with that of the rest of the case. These carry a risk of deformation when dropped.

Our company ‘s cases are stress tested with 3DCAD, and we have conducted several drop tests. We think that actual drop test are of the utmost importance.
Our cases are designed to withstand being dropped several times without deforming.
Designing a case that protects and easy to use led us to using the aforementioned designs.

Gild Design's cases may not be fancy to look at. Attaching or removing them with the bolt may also take a bit of time.
However, we think providing users with stress-free operation and a build quality that resists damage due to falls and bending should be of primary importance in our designs.
We want to provide cases that will protect your phone for 2 years at the least ― Even if the case has been roughly used.
Smooth Our pursuit of usability
Experimenting over and over again we designed this bumper is to
have no uncomfortable feeling between the bumper and the finger.
It is also possible to use the swipe smoothly.
We pursued a case design that would be easy to hold without causing any discomfort when attached to the iPhone
We completed our design after repeated trial manufacturing runs in order to get this just right.
Our cases are designed not to interfere with the operability of any of the iPhone's main functions ―
including the earphone jack, lightning cable, and volume button.
Rubber o rings are attached to prevent the screws from losing. Available color bolts are the same size and
can be used for iPhone 11 cases.
Our iPhone cases also come equipped with a strap hole.
The strap is connected on the bottom left of the phone,
so it will not interfere with the mouthpiece during phone conversations.
The cases can also be easily stored in your pocket.		 Cradle ( compatible for apple's genuine lighting cable)
can be used for iPhone 7. Even the case is attached.
Regarding the Qi wireless charge
It is possible to charge with a Qi wireless charger while using a Solid bumper case (*1)
It will not charge when using a Solid case or an aluminum back panel.
( Please charge with the genuine lighting cable attached with the iPhone)
Regarding the WIFI、3G、4G、Bluetooth、GPS、NFC, etc.
(When an aluminum panel is attached the conditions are the same as the Solid case. )
Face ID → There are no problems while using face recognition and unlocking.
Apple Pay → There are no problem using wifi for both Solid bumper and Solid case. *2
Wifi → There are no problem using wifi for both Solid bumper and Solid case. *2
3G → There are no problem using 3G while the Solid bumper is attached.
Regarding the Solid case, there is some interference with the signal.
However, there is no problem when receiving 4G. *2
4G → There are no problem using 4G for both Solid bumper and Solid case. *2
Bluetooth → There are no problem using Bluetooth for both Solid bumper and Solid case. *2
GPS → There are no problem using GPS for both Solid bumper and Solid case. *2
*1 Using the Qi wireless charger while the case is attached has the possibilities to lower
the charge efficiency due to the 1.5mm thickness of the case that makes a gap between
the wireless charger and the iPhone. Also, there will be a difference on
the charging time depending on the output wattage and the voltage of the adapter the Qi wireless charger.

*2 This product is made of Duralumin, which interrupts the signal from the back of the iPhone.
It is possible that might lower the phone reception.
Using the case in places with a poor reception in the first place can lower the reception of the signal even more. However, there are no problems in places with a good reception.
Color variations
Silver Black
Red ChampagneGold
【Size,Weight】
11.7×79.5×154.8mm、20g

【Included】
Solid bumper 1set、
Screw 5 pieces(Includes one spare)
Shock absorber 10pieces(Includes two spare)、
Oring 5 pieces(Includes one spare)
Colors
Please place your order after reading and agreeing with the notes below.
■A numerous order is expected. Therefore please understand that even a pre-order might not be included on the first shipment.

■Due to a tremendous amount of orders it might take 1 to 2 months before we ship the item.

■Due to the production of the CRYSTAL AMOR film,
there are possibilities that the items will not be complete at the same time.

■Your order will be shipped as soon as the product is made.
Round edge crystal armor for iPhone 11 / XR
Tempered glass protective film for iPhone 11 produced by Glass Coating Development Division of Apeiros CO., Ltd,

perfectly match the GILD design’s bumper. It is designed together since the development of GILD design’s bumper.
It is designed together since the development of GILD design’s bumper.
Because the edge of the iPhone 11's LCD is round, ordinary bumpers end up creating a noticeable space between
the bumper and the film. This interferes with the bumper's ability to protect the phone, and with aesthetics.

Gild Design's bumper and the Crystal Armor Tempered Glass LCD Protective Film are a perfect match.
They fit together perfectly without creating any extraneous space between the bumper and the iPhone unit.


【What is Crystal Armor?】
Crystal Armor is an iPhone X tempered glass protective film produced by Apeiros Co., Ltd.
― a company developing touch panel glass coating technology.
Crystal Armor's smoothness, anti-fingerprint effect,
and very clear glass improve visibility and allow for the iPhone 11 to be used more comfortably.
Crystal Armor also protects your screen against scratches due to everyday use and damage to the LCD screen from falls.
This film offers the best of both worlds ― durability and operability ― at a thickness of just 0.33mm.

［ Specifications ］
・Glass thickness - 0.33mm
・Fussode coat (anti-fingerprint coating)
・Round edge processing
・Pencil hardness - 9H
・Micro-fiber cloth included

*This is the same Crystal Armor product offered on the open market
Product no：43129
JAN：4589882562135
Round edge crystal armor for iPhone 11 / XR
Product code：GI14-33
Price：2,500yen
The product below can be used with the Solid bumper.
Colors
Aluminum color screw set
Regarding postage

*For DHL
If the total value of your order is 11,999 yen or less, you will be charged 2,500 yen for shipping.
If the total value of your order is 12,000 yen or more, you will be charged 1,500 yen for shipping.


Please be sure to add your phone number on PayPal when using DHL Priority shipping.
We cannot process the shipping if this information is not included on the invoice.
Please place your order after reading and agreeing with the notes below.
■The shipping will start by late March as soon as the product is ready.

■A numerous order is expected. Therefore please understand that even a pre-order might not be included on the first shipment.

■Due to a tremendous amount of orders it might take 1 to 2 months before we ship the item.

■Due to the production of the CRYSTAL ARMOR film,
there are possibilities that the items will not be complete at the same time.

■Your order will be shipped as soon as the product is made.
Warning
・Please understand that we are not responsible for any breakage, or damage that may be caused by actions that were not suggested in this instruction.

・This product is made of Duralumin, which interrupts the signal from the back of the iPhone. It is possible that might lower the phone reception.

・This product is anodized. There are two dots that were not anodized on the inside of the case. These are the electrical connection places that will not catch the color during the anodizing process, and it is not a defect.

・This product is designed for iPhone 11.

・This product is not made to protect the iPhone 11 completely from all kinds of damage. Please notice that we will not be responsible for any breakage, loss, damage, or data loss of the iPhone.

・By using silicone shock absorber sheets, our product is designed to prevent the iPhone and the aluminum case from touching each other, and it is not designed to protect the iPhone from all damage.

・Please be aware that our company will not be responsible for any scratches on your iPhone when using the case.

・We might make changes on the case functions, appearance, or package contents without giving a notice.

・There are possibilities that chargers and earphones that are made by companies other than apple cannot be used. (The diameter of the earphone jack is 8.5mm)

・Any protection film under 0.2mm can be used. However, depending on the type of the film there will be possibilities that the film make a gap between it and the screen.

・This case is made of aluminum! Please be careful on the sharp edges when installing the case.

・There is a top and bottom in this product. Please be sure that the circular cut on the case will go to the earphone jack side.

・After putting the wrench firmly into the screw, please fasten it with the right amount of force to prevent the screw from breaking.

・Please note that as the characteristics of anodizing, it is difficult to produce the same color.
There are possibilities that color differs from the image due to the production lot
※iPhone.iPad are trademarks of Apple Inc.
※The trademark'iPhone'is used with a license from Aiphone K.K.